HONDA 2008 Pilot - Manual (Page 244)

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Turn the ignition switch to the ON
(II) position.
Press the select/reset knob
repeatedly until the engine oil life
is displayed.
All maintenance items displayed on
the information display are in code.
For an explanation of these
maintenance codes, see page
.
You can change the information
display from the engine oil life
display to the odometer, the trip
meter, or the outside temperature (if
equipped) every time you press and
release the select/reset knob.
When the engine oil life is 0 percent
or negative mileage, the
maintenance minder indicator
(
) remains on even if you
change the information display.
Immediately have the service
performed, and make sure to reset
the display as described on the
following.
1.
2. 243
Maintenance Minder
Resetting the Engine Oil Lif e
Display Maintenance Main Items and Sub
Items
240
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEM
2008 Pilot
Table Of Contents Main Menu