FIAT Sedici - Manual (Page 91)

90
Do not attempt to adjust the
display while driving.
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
WARNING
NOTE
❒ If you push the indicator selector knob
or do not turn the knob for more than
5 seconds while activating the illumi-
nation control, the illumination con-
trol will be canceled automatically and
the display (D) will show the odome-
ter indication.
❒ You can change the brightness when
the position lights or headlights are on
even if the ignition switch is in the
“ACC” or “LOCK” position.
❒ When you reconnect the negative (–)
terminal to the battery, the brightness
of the instrument panel lights will be
reinitialized. Readjust the brightness
according to your preference.
NOTE If you select the highest brightness
level when the position lights or headlights
are on, the instrument panel lights are not
dimmed.
Clock (for versions/markets, where
provided)
When the ignition switch is in the “ON”
position, the display (E) shows the time.
To change the time indication:
❒ Push the trip meter selector knob (1)
and the indicator selector knob (2) to-
gether.
80JM039
Illumination control setting
When the starting device is “ON”, the in-
strument panel lights switch on.
The vehicle is equipped with a system
which automatically reduces the bright-
ness of the instrument panel when the
headlamps or side lights are turned on.
The brightness of the instrument panel can
be changed independently of the head-
lamps or side lights being on.
To increase the brightness of the instru-
ment panel lights, rotate the display se-
lection knob (2) clockwise.
To decrease the brightness of the instru-
ment panel lights, rotate the display se-
lection knob (2) anticlockwise.
The change in brightness is signalled by the
symbol (1) on the instrument panel light-
ing up.
(1)
(2)
(A)
(C)
(E)
81A181