FIAT Sedici - Manual (Page 107)

106
(2)
80JM047
(3)
(a)
(b)
79JF009
Blower speed selector (2)
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If the “AUTO” switch (8) is pushed, the
blower speed will vary automatically as the
climate control system maintains the se-
lected temperature.
Air intake selector (3)
Push the air intake selector (3) to change
between the following modes.
If the “AUTO” switch (8) is pushed, the
air intake will vary automatically as the cli-
mate control system maintains the se-
lected temperature.
RECIRCULATED AIR (a)
When this mode is selected, outside air is
shut off and inside air is recirculated. This
mode is suitable when driving through an
area with polluted air such as a tunnel, or
when attempting to quickly cool down the
vehicle.
FRESH AIR (b)
When this mode is selected, outside air is
introduced.
“FRESH AIR” and “RECIRCULATED AIR”
are selected alternately each time the air
intake selector is pushed.
NOTE If you select “RECIRCULATED
AIR” for an extended period of time, the
air in the vehicle can become contami-
nated. Therefore, you should occasional-
ly select “FRESH AIR”.