FIAT Sedici - Manual (Page 86)

85
(1) (2) (3)
(D)
(B)
(A)
(C)
(E)
80JM104
INFORMATION
DISPLAY
When the ignition switch is in the “ON”
position, the information display shows
the following information.
Display (A)
Instantaneous fuel consumption
Display (B)
Trip meter / Average fuel consumption /
Driving range / Thermometer / Oil Life
Monitoring (for Diesel Engine Model)
Display (C)
Transaxle selector position indicator (for
automatic transaxle)
Display (D)
Odometer/Illumination control setting
Display (E)
Clock (for versions/markets, where pro-
vided)
80JM081
1. Trip meter selector knob
2. Indicator selector knob
3. Information display
Instantaneous Fuel Consumption
The display (A) shows instantaneous fuel
consumption with a bar graph only when
the vehicle is moving.
NOTE
❒ The display does not show the bar
graph unless the vehicle is moving.
❒ The indicated maximum value of in-
stantaneous fuel consumption is 30.
No more than 30 will be indicated on
the display even if the actual instanta-
neous fuel consumption is higher.
❒ The indication on the display may be
delayed if fuel consumption is greatly
affected by driving conditions.
❒ The display shows estimated values.
Indications may not be the same as ac-
tual values.
❒ You can change the units that instan-
taneous fuel consumption is displayed
in. Refer to “Average fuel consump-
tion” in this section.
You can turn off or on the indication of in-
stantaneous fuel consumption according
to the following instruction.