FIAT Sedici - Manual (Page 87)

86
a. Trip meter A
b. Trip meter B
c. Average fuel consumption
d. Driving range
e. Thermometer
f. Oil life monitoring (for Diesel Engine
Model)
(a)
(b)
(c)
(d)
(e)
(f)
79JM009
AS
Push the trip meter selector knob (1).
QZ
Push the indicator selector knob (2).
Do not attempt to adjust the
display while driving.
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
WARNING
NOTE When you reconnect the negative
(–) terminal to the battery, the indication
of the instantaneous fuel consumption will
be reinitialized. Change the indication
again to your preference.
Trip meter / Average Fuel
Consumption / Driving Range /
Thermometer / Oil Life
Monitoring (for Diesel Engine Model)
When the ignition switch is in the “ON”
position, the display (B) shows one of the
following indications, trip meter A, trip
meter B, average fuel consumption, dri-
ving range, thermometer or oil life moni-
toring (if equipped).
To switch the display indication (B), push
the trip meter selector knob (1) or the in-
dicator selector knob (2) quickly.
80JM105
80JM106
❒ Change the display (B) to the driving
range by pushing the indicator selec-
tor knob (2).
❒ While pushing and holding the trip me-
ter selector knob (1), turn the indica-
tor selector knob (2) to turn off or on
the indication of instantaneous fuel
consumption.