Spark plugs (gasoline engine) – FIAT Sedici User Manual
Page 203
202
❒ Unclamp the side clamps, and remove
the element from the air cleaner case.
If it appears to be dirty, replace it with
a new one.
For diesel versions
SPARK PLUGS
(Gasoline engine)
For Nickel spark plugs (traditional type):
You should inspect spark plugs periodi-
cally for carbon deposits. When carbon
accumulates on a spark plug, a strong
spark may not be produced. Remove car-
bon deposits with a wire or pin and adjust
the spark plug gap.
To access the spark plugs:
❒ Remove the air cleaner case. Refer to
“Air Cleaner” in this section.
❒ If necessary, disconnect the coupler (1)
while pushing the release lever.
❒ Remove the ignitor bolts.
❒ Pull the spark plug boots out.
NOTE When installation, make sure the
wires, couplers, sealing rubber of air clean-
er assy and washers, are correctly re-
turned in place.
(1)
80JM125
60G102
Correct
Wrong
79JM016
80JM067
❒ Loosen the screws and remove the fil-
ter element from the air cleaner casing.
If the element is dirty, replace it with a
new one.