FIAT Sedici - Manual (Page 192)

191
ENGINE OIL
AND FILTER
OIL SPECIFICATIONS -
GASOLINE ENGINES
Check that the engine oil used meets the
ACEA C3 specifications; recommended
product SELENIA K P.E. SAE 5W-40
C.T.R. F603.C07 classification FIAT
9.55535-S2.
OIL SPECIFICATIONS -
DIESEL ENGINES
Check that the engine oil used exceeds
the Fiat 9.55535-S1 specifications; recom-
mended product SELENIA WR P.E. SAE
5W-30 C.T.R. F510.D07. In the event of
an emergency in which the correct prod-
ucts are not available, lubricants with at
least ACEA C2 performance are accept-
able; however, in this case optimum en-
gine performance is not guaranteed and
the lubricants should be replaced with rec-
ommended products as soon as possible
at a Fiat Dealership.
DRIVE BELT
63J132
DEF: 4.5 – 5.5 mm
(0.18 – 0.22 in.)
DEF: 3 – 5 mm
(0.12 – 0.20 in.)
DEF: 7 – 8 mm
(0.28 – 0.31 in.)
AC
GE
→
: 100 N (10 kg, 22 lbs) press
GE: Generator
DEF: Deflection
AC: Air conditioner compressor
When the engine is running,
keep hands, hair, clothing,
tools, etc. away from the moving fan
and drive belts.
WARNING
For Gasoline Engine Model
Make sure the drive belt tension is cor-
rect. If the belt is too loose, insufficient
battery charging, engine overheating, poor
power steering, poor air conditioning, or
excessive belt wear can result. When you
press the belt with your thumb midway
between the pulleys, there should be a de-
flection according to the following chart.
The belts should also be examined to en-
sure that they are not damaged.
If you need to replace or adjust the belt
have it done by your Fiat Dealership.
For Diesel Engine Model
The drive belts tension is adjusted auto-
matically.