FIAT Linea User Manual

Page 44

SAFETY DEVICES

CORRECT USE OF THE

CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Average consumption

This indicates the average consumption
from the start of the new mission.

Instant consumption

This indicates the fuel consumption. The
value is constantly updated. The message
“----” will appear on the display
if the car is parked with the engine run-
ning.

Average speed

This shows the car average speed as a
function of the overall time elapsed since
the start of the new mission.

Travel time

This value shows the time elapsed since
the start of the new mission.

IMPORTANT If information is not avail-
able, the message “----” will appear instead
of the Trip Computer values. Displaying
of the values will be resumed when nor-
mal operation is restored without reset-
ting the values displayed before the prob-
lem nor starting a new mission.

TRIP button fig. 26
Button TRIP, set on the top of the right
steering column stalk, shall be used (with
ignition key at MAR) to display and to re-
set the previously described values to start
a new mission:
– briefly press to display the different val-
ues
– hold pressed to reset and then start a
new mission.

New mission
Reset can be:
– “manual” resetting by the user, by press-
ing the relevant button;
– “automatic” resetting, when the “Trip dis-
tance” reaches 3999.9 km or 9999.9 km
(according to the type of display) or when
the “Travel time” reaches 99.59 (99 hours
and 59 minutes);

– after disconnecting/reconnecting the
battery.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip A” makes it possible to reset only
the information associated with this func-
tion.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip B” makes it possible to reset only
the information associated with this func-
tion.

Start of journey procedure

With ignition key at MAR, press and keep
button TRIP pressed for over 2 seconds
to reset.

Exit Trip

To exit the Trip function: hold MENU
ESC pressed for longer than 2 seconds.

fig. 26

F0R0020m

032-043 LINEA 1ed GB 3-09-2008 17:28 Pagina 43