FIAT Linea - Manual (Page 153)

152
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
Versions with steel rims
Proceed as follows:
❒ make sure the contact surfaces be-
tween spare wheel and hub are clean
so that the fastening bolts will not come
loose;
❒ fit the standard wheel by inserting the
first bolt for two threads into the hole
closest to the inflation valve;
❒ fit the wheel cap making the lunette
hole coincide with the bolt you have fit-
ted then, fit the other 3 bolts;
❒ using the wrench provided, tighten the
fastening bolts;
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tight-
en the bolts in the sequence shown
previously in the figure.
Versions with alloy rims
Proceed as follows:
❒ insert the wheel on the hub and using
the wrench provided tighten the bolts;
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tight-
en the bolts in the sequence shown in
the figure.
When you have finished
❒ stow the spare wheel in the space pro-
vided in the boot;
❒ fit the jack partially open in its box
C-fig. 2 forcing it lightly to prevent it
from vibrating when travelling;
❒ put the tools back into their places in
the container;
❒ stow the container C-fig. 2, complete
with tools in the spare wheel;
❒ tight the tool box fastener A-fig. 2;
❒ reposition the mat in the boot.
145-176 LINEA 1ed GB 5-09-2008 9:22 Pagina 152