FIAT Linea User Manual

Page 196

195

ARNING

LIGHTS AND MESSAGES

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

Replacing the windscreen wiper
blades fig. 15

How to remove the blade:
❒ raise the windscreen wiper arm A from

the windscreen;

❒ turn blade B 90° around pin C, locat-

ed at the end of the wiper arm;

❒ press the blade locking tabs;
❒ remove the blade from pin C.

fig. 15

F0R0236m

SPRAY NOZZLES

Windscreen washer fig. 16

If there is no jet of fluid, firstly check that
there is fluid in the reservoir: see “Check-
ing fluid levels” in this section).

Then check that the nozzle holes are not
clogged, if necessary using a needle.

The windscreen jets are directed by ad-
justing the angle of the nozzles.

Fluid jets shall be directed at about

height from the window upper edge.

fig. 16

F0R0143m

How to insert the blade:
❒ insert the blade fastening tabs in the

hole on the end of the arm;

❒ refit the arm with the blade on the

windscreen.

177-200 LINEA 1ed GB 3-09-2008 17:31 Pagina 195