FIAT Linea User Manual

Page 158

157

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE

CAR

IN AN

EMERGENCY

❒ if at least 1.8 bar pressure is read, re-

store proper pressure (with engine
running and handbrake on) and restart;

❒ drive with the utmost care to the near-

est Fiat Dealership.

FOR CHECKING AND
RESTORING PRESSURE ONLY

The compressor may also be used for
restoring pressure only. Release coupling
A-fig. 14 and connect directly to the tyre
valve fig. 13. In this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.

CYLINDER REPLACEMENT
PROCEDURE

To replace the cylinder proceed as fol-
lows:
❒ release connection A-fig. 14;
❒ turn anticlockwise the cylinder to re-

place and raise it;

❒ fit the new cylinder and turn it clock-

wise;

❒ connect connection A to the cylinder

and fit the transparent tube B into the
proper space.

Remember to inform the
workshop that the tyre has

been treated with a quick repair kit.
Give the instruction booklet to the
tyre repair workshop personnel.

WARNING

fig. 13

F0R0111m

fig. 14

F0R0161m

145-176 LINEA 1ed GB 5-09-2008 9:22 Pagina 157