FIAT Linea - Manual (Page 166)

165
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT CEILING LIGHT
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light A-fig. 29;
❒ open the protection lid B-fig. 30;
❒ replace bulbs C releasing them from the
side contacts; make sure that new bulbs
are correctly clamped between contacts;
❒ re-close the lid B-fig. 30 and secure light
A-fig. 29 into its housing locking it
properly.
REAR CEILING LIGHT
(where provided)
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light D-fig. 31;
❒ open the protection lid E-fig. 32;
❒ change the bulb F-fig. 32 releasing it
from the side contacts and making sure
the new bulb is correctly fastened be-
tween the contacts;
❒ re-close the protection lid E-fig. 32
and secure light D-fig. 31 into its hous-
ing locking it properly.
fig. 29 F0R0115m
fig. 30 F0R0117m
fig. 31 F0R0116m
fig. 32 F0R0118m
145-176 LINEA 1ed GB 5-09-2008 9:22 Pagina 165