FIAT Linea User Manual

Page 36

SAFETY DEVICES

CORRECT USE OF THE

CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Note The speed may be set in the range
from 30 to 200 km/h, or from 20 to 125
mph according to the previously chosen
unit (see “Setting the distance unit”) de-
scribed below. The setting will in-
crease/decrease by five units each time
button +/– is pressed. Hold button +/–
pressed to increase/decrease the setting
rapidly. Complete the setting by briefly
pressing the button when you approach
the required setting.

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

To cancel the setting, proceed as follows:

– briefly press button MENU ESC: (On)
will blink on the display;

– press button –: (Off) will flash on the dis-
play;

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Speed beep (Speed limit)

This function is used to set the car speed
limit (km/h or mph); when this limit is ex-
ceeded the driver is immediately alerted
(see section “Warning lights and mes-
sages”).

To set the speed limit, proceed as follows:

– briefly press button MENU ESC, the
display will show the wording (Speed
Buzz);

– press button + or – to select speed lim-
it activation (On) or deactivation (Off);

– if the function has been activated (On),
press buttons + or – to select the re-
quired speed limit and then press MENU
ESC to confirm.

032-043 LINEA 1ed GB 3-09-2008 17:28 Pagina 35