FIAT Qubo User Manual

Page 68

SAFETY

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

REMOVING REAR SEAT

When bulky cargos need to be carried, the
loading compartment can be further ex-
panded by removing the rear seat.

After having folded the rear seat as de-
scribed previously, adjust the two brack-
ets A-fig. 82 located at the side under the
seat (one on each side).

REPOSITIONING
THE REAR SEAT

Proceed as follows:
❒ check that the seat belt is correctly fit-

ted in the corresponding bracket;

❒ bring the seat cushion back in horizon-

tal position and make sure that it is
properly secured;

❒ tip the backrest backwards and make

sure that it is properly secured.

There is a diagram (fig. 83) under the split
seat cushion illustrating the reattachment
to the brackets bolted onto the floor.

fig. 82

F0T0291m

fig. 84

F0T0058m

ANCHORING THE CARGO
fig. 84

For easier cargo fastening, eyebolts have
been supplied on the boot floor (varying
in number according to versions).

fig. 83

F0T0302m

036-082 Fiorino GB 1ed 21-10-2008 14:58 Pagina 67