FIAT Qubo User Manual

Page 13

SAFETY

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

DISABLING THE ALARM

Press button

Æ on the key with the re-

mote control.

The following operations are performed
(excluding some versions):
❒ the direction indicators turn on short-

ly twice;

❒ two short beeps are produced by the

warning buzzer;

❒ the doors are unlocked.
IMPORTANT If the central door locking
system is engaged using the metal insert
of the key, the alarm is not disabled.

VOLUME-SENSING/
ANTI-LIFT PROTECTION

To ensure correct operation of the pro-
tection, it is advisable to fully close the side
windows.

If necessary, the function may be turned
off (e.g. if animals are left in the car) by
pressing key A-fig. 7, located on the front
courtesy light before activating the alarm.

Function deactivation is indicated by the
led located on the key flashing for a few
seconds. If the volume-sensing/anti-lift
protection is turned off, this must be re-
peated whenever the instrument panel is
turned off.

SIGNALS IN THE EVENT
OF ATTEMPTED BREAK-INS

Whenever a break-in is attempted, a
warning light

Y (or symbol on the dis-

play) starts blinking on the instrument pan-
el (in some versions a message also ap-
pears on the display - see section “Warn-
ing lights and messages”).

DISABLING THE ALARM

To permanently disable the alarm (e.g.
during prolonged vehicle shutdown), lock
the vehicle by turning the metal insert of
the key in the door lock.

IMPORTANT If the battery of the key
with the remote control goes down or the
system fails, the alarm is disabled by plac-
ing the key in the ignition system and ro-
tating it to MAR.

fig. 7

F0T0159m

001-035 Fiorino GB 1ed 21-10-2008 14:57 Pagina 12