FIAT Qubo User Manual

Page 33

SAFETY

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

TRIP control button fig. 18

Button TRIP located on the top of the
right steering column stalk is used (with
ignition key at MAR) to display and re-
set the previously described values to start
a new mission:

– short pressing to display the different
values;

– prolonged pressing to reset and then
start a new mission.

fig. 18

F0T0038m

New mission

The new mission begins after:

– “manual” resetting by the user, by press-
ing the relevant button;

– “automatic” resetting, when the “Trip
distance” reaches 3999.9 km or 9999.9 km
(according to the type of display) or when
the “Trip time” reaches 99.59 (99 hours
and 59 minutes);

– disconnection/reconnection of the bat-
tery.

IMPORTANT Value resetting from the
screens of “Trip A” makes it possible to
exclusively reset the data regarding this
function.

IMPORTANT Value resetting from the
screens of “Trip B” makes it possible to
exclusively reset the data regarding this
function.

“Start trip” procedure

With ignition key on MAR, press and hold
button TRIP pressed for over 2 seconds
to reset.

Exit Trip

To exit the Trip function: hold MENU
ESC pressed for longer than 2 seconds.

001-035 Fiorino GB 1ed 21-10-2008 14:57 Pagina 32