FIAT Qubo User Manual

Page 130

129

SAFETY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

❒ If at least 1.8 bar pressure is read, re-

store proper pressure (with engine
running and handbrake on) and restart.

❒ Drive with the utmost care to the near-

est Fiat Dealership.

FOR CHECKING AND
RESTORING PRESSURE ONLY

The compressor may also be used for
restoring pressure only. Release the quick
coupling and connect directly to the tyre
valve fig. 19; in this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.

CYLINDER REPLACEMENT
PROCEDURE

To replace the cylinder proceed as fol-
lows:
❒ disconnect connection B-fig. 20;
❒ turn the cylinder anticlockwise to raise

and replace it;

❒ fit the new cylinder and turn it clock-

wise;

❒ plug connection B into the cylinder and

fit the transparent tube A into the
proper space.

Stop the vehicle if the pres-
sure has dropped below 1.8

bars. The automatic Fix & Go fast re-
pair kit cannot work properly be-
cause the tyre is excessively damaged.
Go to a Fiat Dealership.

WARNING

Remember to inform the
workshop that the tyre has

been treated with a fast repair kit.
Give the instruction booklet to the
tyre repair workshop personnel.

WARNING

fig. 19

F0T192m

fig. 20

F0T0132m

119-150 Fiorino GB 1ed 21-10-2008 15:05 Pagina 129