FIAT Qubo User Manual
Page 123
122
SAFETY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
fig. 3
F0T0281m
Important notes:
❒ the jack weight is 1.76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired. If it breaks
it must be replaced with a new jack;
❒ no tool other than the cranking device
has to be fitted on the jack.
To replace a tyre proceed as follows:
❒ stop the vehicle in a position so that it
is not a danger for on-coming traffic in
a location where you can replace the
wheel safely. The ground must be flat
and compact.
❒ Turn the engine off and pull up the
handbrake.
❒ Engage first gear or reverse.
❒ open the rear swing doors the luggage
compartment tailgate, take the tool bag
fig. 2 located on the left side of the lug-
gage compartment releasing the flexible
retainers and place it next to the wheel
to be changed;
❒ the box contains the following tools fig.
3:
A a jack cranking device;
B a jack;
C a wrench for tyre assembly/disassem-
bly;
D a tow hook ring;
E a retention strap for tool box;
F a fuse extractor;
G a screw driver.
The tool box also contains a few spare fus-
es.
fig. 2
F0T0206m
119-150 Fiorino GB 1ed 21-10-2008 15:05 Pagina 122