FIAT Panda - Manual (Page 70)

Extending the boot, rear fixed seat.
After removing the parcel shelf, proceed as follows:
❒ move the seat belts to the side, making sure
that they are correctly extended and not twisted;
❒ if there is a third rear seat (for versions/markets,
where provided), release the central belt, winding
the buckle into its housing on the roof panel;
❒ operate the levers at the sides of the rear seats
fig. 55 pushing them towards the inside of the
car, fold the backrest and then bring the backrest
onto the cushion.
The car can be fitted with split rear backrest as an
optional on some versions. The boot extension
possibilities are many and can be chosen according to
the number of passengers and the amount of
luggage to be carried:
❒ total extension on the right and left sides
operating as on the non-split version;
❒ partial extension on the right side, with folded
backrest, for transporting two passengers on
the left side;
❒ partial extension on the left side, with folded
backrest, for transporting one passengers on the
right side.
Repositioning the rear seat
Move the seat belts to the side, making sure that
they are correctly extended and not twisted. Lift up
the backrest folded previously until a click is heard
for the engagement mechanism.
SECURING YOUR LOAD
The luggage compartment contains two attachments
for the cables that secure the load transported and
another two attachments are located on the rear
crossmember.
IMPORTANT Every attachment has a maximum load
capacity of 100 kg.
WARNING
A heavy load that has not been secured
may cause serious injuries in the event
of an accident.
fig. 55 F0W0088
66
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX