FIAT Panda - Manual (Page 158)

SIDE LIGHTS/DAY LIGHTS (DRL)
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 118 and remove the flap B;
❒ adjust the catch C fig. 120 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
REAR LIGHT CLUSTERS
These contain the bulbs for the side lights, brake
lights and direction indicators. The reversing lights
and rear fog lights are located instead in the rear
bumper.
To change the bulb proceed as follows:
❒ slacken the two screws fig. 121 from their seats,
pull gently outwards until releasing the whole
headlight from the two clips (press-fitted D fig. 121
) and release the connector;
❒ undo the five screws B from their seats and
remove the bulb holder C fig. 122;
fig. 119 F0W0198 fig. 120 F0W0069
154
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX