FIAT Panda User Manual

Page 160

FOG LIGHT/REAR FOG LIGHT

To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 123;
❒ adjust the catch C and disconnect the electrical

connector D fig. 124;

❒ turn and remove the bulb holder E;
❒ extract the bulb and replace it;
❒ refit the new lamp and carry out the procedure

described previously in reverse.

WARNING

Before replacing the bulb, wait for the
catalytic converter to cool down: RISK

OF BURNS

NUMBER PLATE LIGHTS

To replace the bulbs proceed as follows:
❒ remove lens A fig. 125;
❒ replace the bulb B fig. 126 releasing it from the

side contacts;

fig. 123

F0W0205

fig. 124

F0W0206

fig. 125

F0W0259

156

GETTINGTO KNOW

YOURCAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX