FIAT Panda - Manual (Page 162)

SINGLE-BULB INTERIOR ROOF LIGHTS
To change the bulbs, proceed as follows:
❒ operate in the point shown by the arrow and
remove the roof light A fig. 129;
❒ open the flap C fig. 130 and replace the bulb B
releasing it from the side contacts;
❒ Insert the new bulb B fig. 130 and make sure that
it is correctly clamped between the contacts;
❒ reclose the flap C fig. 130 and fix the roof light A
fig. 129 in its housing making sure that it is locked.
LUGGAGE COMPARTMENT ROOF LIGHT
To change the bulbs, proceed as follows:
❒ open the luggage compartment and extract the
roof light A fig. 131 working in the point shown
by the arrow;
❒ open the protection B and replace the bulb;
❒ re-close the protection B on the lens;
❒ refit the roof light A by inserting it in its correct
position firstly on one side and then pressing on
the other until it clicks into place.
fig. 128 F0W0067
fig. 129 F0W0237
fig. 130 F0W0235
158
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX