FIAT Panda - Manual (Page 156)

REPLACING EXTERIOR BULBS
For the type of bulb and power rating, see “Changing
a bulb".
FRONT LIGHT CLUSTERS
These contain the bulbs for the dipped beams, main
beams and direction indicators. The bulbs are
arranged as follows fig. 115:
A Main/dipped beam headlights
B Direction indicators
MAIN/DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove cover A fig. 115;
❒ push the connector + bulb holder unit B fig. 116
downwards;
❒ remove the bulb C from connector D and replace
it;
❒ refit the new bulb on the connector making sure
that it is locked correctly, then reinsert the
connector unit and the bulb holder B in
its housing;
❒ then refit the cover A fig. 115.
fig. 115 F0W0033 fig. 116 F0W0068
152
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX