MITSUBISHI ELECTRIC LDT462V - Manual (Page 27)

English-23
English
P-5 Installing the extension module (continued)
Carry out as necessary
Connecting OPS-compliant computer
NOTE:
Operation of all types of OPS-compliant computers isn’t
guaranteed.
Example of commercially available computer:
ARK-DS220F-MTSA1E of Advantech Co., Ltd.
When an OPS-compliant computer (commercially available)
is mounted, set “COOLING FAN” to ON using the SCREEN
SAVER function. See page 48.
1. Mounting the OPS-compliant computer
on the monitor
1. Turn off the main power switch of the monitor and
disconnect the power cord.
CAUTION:
Be sure to disconnect the power cord to prevent breakdown
and electric shock.
2. Use a Phillips screwdriver to unscrew and remove the
option slot cover.
Retain the screw for later use in step 4.
3. Mount a OPS-compliant computer (commercially available)
on the option slot of the monitor.
CAUTION:
To prevent damage, please ensure proper orientation and
position of the OPS-compliant computer before inserting it
fully into the slot.
4. Reuse the two screws removed from step 2 and properly
secure the OPS-compliant computer.
Removal of the OPS-compliant computer
Hold the handle on the OPS-compliant computer for removal.
CAUTION:
Extract the OPS-compliant computer by using the handle only.
Pulling on the cable or other means may cause damage.