MITSUBISHI ELECTRIC LDT462V - Manual (Page 16)

English-12
Flow of preparation
P-1 Preparation for installation
- Determine the installation location
- Ventilation requirements for enclosure mounting
- To avoid the monitor from falling
Page 13
Carry out as necessary
P-2
P-3
P-5
P-6
P-7
P-4
P-8
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Installing the external speakers (commercially available)
Installing the extension module
- Installation of the extension module
- SDI for long-distance connection or multiple-monitor connection
- Connecting OPS-compliant computer
Connecting RS-232C
- Monitor control via RS-232C
Connecting LAN
- Monitor connection using LAN
Installing the monitor
- Installing and removing the stands (The stands are optionally available.)
- Using the wall mount or ceiling mount
- Installing in the portrait position
- Installing the main power switch cover
Pages 14 to 15
Page 16
Page 24
Page 25
Pages 17 to 21
Pages 22 to 23
Page 26
Page 27
Connection procedure
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifi er
Connecting the power cord to the monitor
- Connecting the power source
The monitor is ready for use.
How to Use
Preparation for use