MITSUBISHI ELECTRIC LDT462V - Manual (Page 20)

English-16
To speaker terminal (L) To speaker terminal (R)
Red(+)/Black(-) Red(+)/Black(-)
SPEAKER (S)(L) SPEAKER (S)(R)
Black(-)
Red(+)
Black(-)
Red(+)
Left speaker
(commercially
available)
Right speaker
(commercially
available)
How to install the external speakers
1. Connect the speaker output connectors on the monitor and external speakers (commercially available) using speaker cables.
Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
Specifi cations of the recommended speaker:
Rated input: 10 W
Impedance: 8 Ω (left), 8 Ω (right)
CAUTION:
Use speakers that meet the specifi cations. Otherwise, the monitor or the speakers may have trouble.
P-3 Installing the external speakers
Carry out as necessary