P-4 connection procedure (continued), Connecting with a computer (analog connection) – MITSUBISHI ELECTRIC LDT462V User Manual
Page 22
English-18
Signal cable
(Mini D-SUB 15-pin to Mini D-SUB 15-pin)
To audio output
D-SUB IN
D-SUB OUT
AUDIO IN1
(mini)
AUDIO OUT (RCA)
Audio cable
(ø 3.5 mm stereo mini)
D-SUB IN
AUDIO IN2 (RCA)
Signal cable
(Mini D-SUB 15-pin to Mini D-SUB 15-pin)
Audio cable (RCA)
To D-SUB output
LCD monitor (fi rst monitor)
LCD monitor (second monitor)
Personal computer
(Analog RGB)
Connecting with a computer (analog connection)
Analog connection:
(1) Connect a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the D-SUB IN connector.
(2) Select [D-SUB] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
Second monitor connection:
• Connect the D-SUB OUT connector (mini D-SUB 15-pin) on the fi rst monitor and the D-SUB IN connector (mini D-SUB 15-pin)
on the second monitor using a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The analog input signal of D-SUB selected by the fi rst monitor is output. The digital input signal of HDMI or DVI-D is not output.)
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
• To output audio to the second monitor:
Connect the AUDIO OUT connector on the fi rst monitor and the AUDIO IN2 connector or AUDIO IN3 connector on the second
monitor using an audio cable (RCA) (commercially available).
P-4
Connection procedure (continued)