Olympus SZ61 - Manual (Page 24)

21
Fig. 19
Bring to the center of
the stroke.
Adjusting the focus (Fig. 19)
1. Rotate the focus adjustment knob @ of the SZ2-FO up/down moving
stage to bring the stage at the center of the focusing stroke.
2. Place a specimen on the stage and rotate the focus adjustment knob ²
of the base to bring the specimen into approximate focus. And then
adjust the accurate focus using the focus adjustment knob @ of the up/
down moving stage.
5 Applicable Bases and Restrictions
Base Applicable Auxiliary Objectives Restrictions
· Standard base
SZ2-ST
SZX-ST
· Large base
SZ-STL
SZX-STL
0.5X to 1.5X None
2X
With the SZ2-ST, install the SZ2-FO
so that the focus adjustment knobs
come on the side of the operator.
· Transmitted illumination base
SZX-ILLK
SZX-ILLB2
SZX-ILLD2
@
²
The restrictions are identical whether or not the stage adapter is used.
(Refer to the instruction manual for the SZX illumination base.)
The transmitted light illumination field may be limited depending on the
diameter of the hole on the stage center plate in use.
# Darkfield observation is not available with the SZX-ILLD2.
# The brightness drops when a frost filter is used.
8-4 Gliding Stage SZH-SG
1 External View and Nomenclature
Stage plate
Seat
Finger hook
Gliding stage
Illumination field diameter: 40 mm
Moving range diameter: 40 mm