Assembly, 1 assembly diagram – Olympus SZ61 User Manual

Page 17

SZ2

series

ASSEMBLY

7-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
Assembly steps enclosed in will be detailed on the subsequent pages.

# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any

parts or touching glass surfaces.

Eyepieces

Eyepiece clamping
knobs**

Microscope body other
than the SZ61TR

Body clamping knob

Stage plate

Commercially available
C-mount TV camera
(optional)

Microscope body
of the SZ61TR

Standard base

Ground lead wire*

* To reserve the ESD protection performance, be sure to ground the equipment using a grounding lead wire having a 4

mm banana plug.

** The eyepieces are provided with theft prevention screws (which can be retained using a flat-blade screw driver). If required,

replace the clamping knobs with these screws.

This manual is related to the following products:

SZ51