Olympus SZ61 - Manual (Page 18)

15
Fig. 15
Fig. 14
Mounting
Dismounting
7-2 Detailed Assembly Procedures
· Loosen the body clamping knob @ and insert the microscope body
gently.
}The body clamping knob @ can be attached to any of the three posi-
tions ² around the arm. After installation, attach the knob to a position so
that the knob does not come in the way of the light source, etc.
}If you always perform observation from the side of the focus adjustment
knobs, the microscope body can be installed in the opposite orientation
to that shown in Fig. 13 (at the 180° rotated position).
1. While applying the stage plate ³ to the stage plate holder spring |, fit
the stage plate into the hole and push it from upward to secure the
mounting.
}The stage plate ³ has the milky white and black surfaces. Select the
side facing up according to the specimen.
2. To dismount the stage plate ³, push the stage plate edge near the
holder spring |. As this moves up the opposite edge of the stage plate,
dismount it by holding that edge.
1 Installing the Microscope Body (Fig. 13)
Fig. 13
@
²
³
|
³
3 Mounting the Stage Plate (Figs. 14 & 15)