En + drawings, Compatibility working principle of the descender, Function test – Petzl EXO EASHOOK User Manual
Page 5: Installation on the harness, Stop
5
EXO CE SACOCHE D305100A (040808)
The system must only be used
complete with all components,
and properly packed. Any
modifi cation is prohibited.
This system must only be used
with a seat harness or full-body
harness that meets applicable
standards. The use of a simple
belt is prohibited.
The use of the EXO 15 m with
bag requires an extended
attachment point (see
chapter 9).
Use the evacuation system
with gloves. The descender will
heat up during descent and can
cause burns.
When you tension the system
with your body weight, the rope
coming taut makes the frame of the
descender rotate on the connector
and the cam pinches and brakes the
rope. By holding the braking side
of the rope, the brake hand helps
engage the cam. To free the rope,
pull the handle while holding the
braking side of the rope.
6
7
Compatibility
Working
principle of the
descender
Holding the
OK TRIACT BAR
with your hand,
pull sharply
downward on the
device. The rope
must jam in the
descender.
WARNING
DANGER OF
DEATH if the rope
does not jam in
the descender.
The descender
must be able to
function freely at
all times: freedom
of movement for
the device and
for the cam (see
chapter 11).
8
Function test
STOP !
Attach the bag to the harness belt, on your right, with the two Velcro
strips and the rear positioning strap vertically or horizontally
oriented, depending on the harness.
9
Installation on the harness
CLIPS
VELCROS
Leg loops
Belt