3M SCP717 - Manual (Page 49)

44 © 3M 2008. All Rights Reserved.
Appendices 3M™ Super Close Projection System
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
 If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example: [Fn]+[F3]
 If you experience difficulty changing resolutions or your monitor
freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer
is not displaying a presentation
 If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
 Use “Phase” to correct it. (see page 36)
 Change the monitor colour setting on your computer.
Problem: Image has vertical flickering bar
 Use “Frequency” to make an adjustment. (see page 36)
 Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
HP & Compaq [Fn]+[F4]
Dell  [Fn]+[F8]
Gateway  [Fn]+[F4]
Mac Apple:
System PreferenceDisplayArrangementMirror display
IBM  [Fn]+[F7]
NEC  [Fn]+[F3]
Toshiba  [Fn]+[F5]