Adjusting the projected image, Adjusting the projector image height, 3m™ super close projection system installation – 3M SCP717 User Manual
Page 22
© 3M 2008. All Rights Reserved.
17
3M™ Super Close Projection System
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with elevator feet for adjusting
the image height.
To raise the image:
1. Press the elevator buttons
.
2. Raise the image to the desired height angle
, then re-
lease the button to lock the elevator feet into position.
3. Rotate the tilt adjusting foot
to fine-tune the display
angle.
To lower the image:
1. Press the elevator buttons.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Rotate the tilt adjusting foot
to fine-tune the display
angle.
Elevator Feet
Tilt Adjusting Foot
Elevator Feet
Elevator Buttons
1
1
2
2
3