ZyXEL Communications P-660R-D Series - Manual (Page 55)

P-660R-D Series User’s Guide
Chapter 4 WAN Setup 54
• the ZyXEL Device is in bridge mode
• you set the ZyXEL Device to use a static (fixed) WAN IP address.
4.5 Internet Connection
To change your ZyXEL Device’s WAN Internet access settings, click Network > WAN. The
screen differs by the encapsulation.
See Section 4.1 on page 48 for more information.
Figure 26 Internet Connection (PPPoE)
The following table describes the labels in this screen.
Table 12 Internet Connection
LABEL DESCRIPTION
General
Name Enter the name of your Internet Service Provider, e.g., MyISP. This information is
for identification purposes only.
Mode Select Routing (default) from the drop-down list box if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.