ZyXEL Communications P-660R-D Series - Manual (Page 103)

P-660R-D Series User’s Guide
Chapter 9 Remote Management Configuration 102
9.3 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next. The
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.
Figure 55 Telnet Configuration on a TCP/IP Network
9.4 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 56 Remote Management: Telnet
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your settings back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 34 Remote Management: WWW
LABEL DESCRIPTION