Xilinx LogiCore PCI v3.0 - Manual (Page 57)

PCI v3.0.151 Getting Started Guide www.xilinx.com 57
UG157 August 31, 2005
Model Technology ModelSim R
cp ../xilinx/pcim_top_routed.sdf .
2. View the ping.files file. This file lists the individual source files required, and is
shown below:
./pcim_top_routed.vhd
../source/busrecord.vhd
../source/dumb_arbiter.vhd
../source/dumb_targ32.vhd
../source/dumb_targ64.vhd
../source/stimulus.vhd
../source/ping_tb.vhd
3. Invoke ModelSim, and ensure that the current directory is set to:
/vhdl/example/post_sim
4. Create the simprim library. This step is required only once, the first time you perform
a simulation:
vlib simprim
vcom -93 -work simprim
Path>/vhdl/src/simprims/simprim_Vpackage_mti.vhd
vcom -93 -work simprim
Path>/vhdl/src/simprims/simprim_Vcomponents_mti.vhd
vcom -93 -work simprim
Path>/vhdl/src/simprims/simprim_VITAL_mti.vhd
5. Type the following to run the simulation:
do modelsim.do
This step compiles all modules, loads them into the simulator, displays the waveform
viewer, and runs the simulation.