Xilinx LogiCore PCI v3.0 User Manual
Page 49
PCI v3.0.151 Getting Started Guide
49
UG157 August 31, 2005
Synplicity Synplify
R
5.
Select the virtex.vhd file; then click Add to move this source file into the Files To
Add list.
The next files are located in:
6.
Navigate to the xpci directory, select the simulation model and the wrapper files
(pci_lc_i.vhd and pcim_lc.vhd), and click Add to move these files into the Files To Add
list. (Ctrl-click to select multiple files.)
Figure 5-14:
Select Files to Add (Library)
Figure 5-15:
Select Files to Add (LogiCORE Files)