ZyXEL Communications NBG334SH - Manual (Page 33)

ZyXEL NBG-334SH User’s Guide
33
C
H A P T E R
2
Wireless Tutorial
This chapter gives you examples of how to set up an access point and wireless client for
wireless communication using the following parameters. The wireless clients can access the
Internet through an AP wirelessly.
2.1 Example Parameters
An access point (AP) or wireless router is referred to as an “AP” and a computer with a
wireless network card or USB/PCI adapter is referred to as a “wireless client” here.
We use the M-302 utility screens as an example for the wireless client. The screens may vary
for different models.
2.2 Configuring the AP
Flow the steps below to configure the wireless settings on your AP.
1 Open the Wireless LAN > General screen in the AP’s web configurator.
SSID SSID_Example3
Channel 6
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
802.11 mode IEEE 802.11b/g