ZyXEL Communications ZyXEL ZyAIR A-6000 User Manual
Page 38
A-6000 High Speed, Long Range Ethernet Wireless Bridge
CLI commands
4-5
(22) To display/modify Telnet
Use the get/set telnet command to enable or disable telnet access to the BU.
-> get telnet
Telnet Access: Enabled
-> set telnet disable
Telnet Access: Disabled
-> set telnet enable
Telnet Access: Enabled
To display/modify Timeout
Use the get/set timeout command to display or modify the telnet timeout.
-> get timeout
Telnet Timeout:
-> set timeout
Telnet Timeout:
(23) To display/modify Time Zone
Use the get/set tzone command to display or modify the time zone setting.
-> get tzone
SNTP/NTP Time Zone
-> set tzone
(24) To display elapsed time
Use the get uptime command to To display the elapsed time the BU has been up and running.
-> get uptime
BU Uptime -- Day 0, 15:32:29
(25) To display time and date
Use the timeofday command to to display the current time and date.. This command allows the BU to use the
SNTP protocol to get the current time from the SNTP/NTP server. First set up the IP address of the SNTP/NTP
server before using this command. If no time zone is defined, the GMT time is returned else local time for the
specified time zone is returned. Use
“set tzone” to set the local time zone. For example, use “set tzone –8”
to set the time zone for the west coast. Once time zone is defined, the adjusted daylight saving local time of the
time zone is returned. The daylight saving time applies only to the United States.
-> time
SNTP/NTP Server is not configured.
Use "set sntpServer" to configure the SNTP server IP Address
-> set sntpserver 129.6.15.28
SNTP/NTP Server IP Address: 129.6.15.28
SNTP/NTP Server returns GMT time. Use "set tzone" to set up your local
time zone
-> get sntpserver
SNTP/NTP Server IP Address: 129.6.15.28
-> time
THU FEB 23 01:55:35 2003 GMT
-> set tzone -8
SNTP/NTP Time Zone: -8
-> time
WED FEB 22 17:55:57 2003
(26) To display software version
Use the version command to To display the version number of the current software.
-> version
version:0.9.0.1
Feb 19 2003 00:15:45