Zebra Technologies ZEBRA Z4M H-974 - Manual (Page 43)

H-974
PAGE 43 OF 57 0808 IH-974
NOTE: If print quality has not improved after performing this
procedure, try cleaning the printhead with Save-a-Printhead cleaning
film. This specially coated material removes contamination buildup
without damaging the printhead. Call your authorized Zebra reseller
for more information.
Cleaning the Sensors
Brush or vacuum any accumulated paper lint and dust away from the printer sensors.
Refer to Figure 23. The reflective sensor, transmissive sensor, and ribbon sensor
should be cleaned on a regular basis to ensure proper operation of the printer. For
printers with the value peel-off, power peel-off, and/or power rewind option(s)
installed, clean the take label sensor.
Zebra Z4M Printer User’s Guide 57
Printhead
assembly
Transmissive
sensor
Reflective
sensor
Ribbon
sensor
Take label
sensor
Platen roller
Figure 23