Zebra Technologies ZEBRA Z4M H-974 - Manual (Page 20)

H-974
PAGE 20 OF 57 0808 IH-974
Backing Removal
1. Cut the backing material prior to where it winds onto the take-up spindle.
2. Rotate the take-up spindle until the rewind media guide is in the “12 o’clock”
position.
3. Loosen the thumbscrew and slide out the rewind media guide to the end of the
take-up spindle.
4. Slide the core and backing material from the take-up spindle.
Zebra Z4M Printer User’s Guide 29
Media supply guide
Media
guide
Ribbon
sensor
Media
supply
hanger
Media
alignment
spindle
Printhead
open lever
Take-up
spindle
Rewind
media
guide
Thumbscrew
Label
Front
housing
assembly
Printhead
assembly
Transmissive
sensor
Dancer
Figure 17