Zebra Technologies ZEBRA Z4M H-974 - Manual (Page 35)

H-974
PAGE 35 OF 57 0808 IH-974
50 Zebra Z4M Printer User’s Guide
Selecting ZPL Mode
Display Shows Action/Explanation
ZPL MODE
Selecting ZPL Mode Press the INCREMENT (+) or DECREMENT (-) key to
display other choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer will remain in the selected mode until it is changed by this front panel
instruction or by using a ZPL/ZPL II command. The printer accepts label formats
written in either ZPL or ZPL II. This eliminates the need to rewrite any ZPL formats
you already have. Refer to the ZPL II Programming Guide Volume II for more
information on the differences between ZPL and ZPL II .
Power-Up and Head Close Parameters
MEDIA POWER UP
Media Power-Up Press the INCREMENT (+) or DECREMENT (-) key to
display other choices.
Default: Feed
Selections: Feed, calibration, length, and no motion
This parameter establishes the action of the media when the printer is turned
on.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.
HEAD CLOSE
Head Close Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: Feed
Selections: Feed, calibration, length, no motion
Determines the action of the media after the printhead has been opened and
then closed.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.