York PREDATOR BP 090 - Manual (Page 3)

259336-YTG-B-0606
Unitary Products Group 3
FEATURES
• High Efficiency – High efficiency units reach as high as
9.1 EER.
• Service Friendly – The Predator ® incorporates a num-
ber of enhancements which improve serviceability.
The motor and blower slide out of the unit as a common
assembly. This facilitates greater access to all the indoor
airflow components, thus simplifying maintenance and
adjustment.
Service time is reduced through the use of hinged, tool-
less panels. Such panels provide access to frequently
inspected components and areas, including the control
box, compressors, filters, indoor motor & blower, and the
heating section. The panels are screwed in place at the
factory to prevent access by children or other unautho-
rized persons. It is recommended that the panels be
secured with screws once service is complete.
Service windows have been placed in both condenser
section walls. Rotation of the cover allows easy access
to the condenser coils for cleaning or inspection.
The unit control board utilizes flash codes to aid in diag-
nosis of unit malfunctions. Unique flash codes quickly
identify the source of the unit alarm.
All units use the same standard filter size. This stan-
dardization removes any confusion on which filter sizes
are needed for replacement.
The non-corrosive drain pan slides out of the unit to per-
mit easy cleaning. The drain pan is accessed by remov-
ing the drain pan cover plate on the rear of the unit.
Once the plate is removed, the drain pan slides out
through the rear of the unit.
All Predator
®
units have a second model nameplate
located inside the control access door. This is to prevent
deterioration of the nameplate through weathering.
FIGURE 1 - PREDATOR ® COMPONENT LOCATION
Compressor #1 Access
(High-Eff Compressor)
Tool-less
Door Latch
Side entry power
and control wiring
knockouts Slide-out drain pain
with steel 3/4” NPT
Connection
Belt-drive
blower
motor
Condenser
section
Filter drier (solid core)
Filter access
(2” throw-away)
Disconnect location
(optional disconnect switch)
Compressor #2
Access (High-Eff
Compressor)
Simplicity ™ Control board
w/screw connectors for T-
stat wiring and network
connection
Roof curbs in eight- and
fourteen-inch heights. Roof
curbs for transitioning from
Sunline™ footprint to the
BP series footprint are also
available (field installed
accessory)
Base Rails w/
Forklift Slots (3
Sides) & Lifting
Holes
Terminal block
for hi-voltage
connection
Dual stage cool-
ing for maximum
comfort (7-1/2 -
12-1/2 Only)
Second Model
Nameplate Inside
Control Door
Slide-out motor and
blower assembly for
easy adjustment and
service.