Figure 7-4, Single mac header, Filter usage examples – Xilinx IP Ethernet AVB Endpoint v2.4 UG492 User Manual
Page 70: Single mac header filter usage examples, Full destination address (da) match

70
Ethernet AVB Endpoint User Guide
UG492 September 21, 2010
Chapter 7: Ethernet AVB Endpoint Reception
Single MAC Header Filter Usage Examples
Full Destination Address (DA) Match
The example illustrated in
shows a single MAC Header Filter (one of the eight
provided) configured to filter on a Destination Address. In order for the frame to obtain a
match, the initial 48-bits of the received frame must exactly match the first 48-bits of the
Match Pattern Register.
This example provides backwards compatibility with the Address Filters provided in the
Tri-Mode Ethernet MAC (which must be disabled).
X-Ref Target - Figure 7-4
Figure 7-4:
Filtering of Frames with a Full DA Match
rx_clk
legacy_rx_data[7:0]
legacy_rx_data_valid
rx_clk_enable
DA
SA
DATA
L/T
VLAN
0xD
A
0x01
0x02
0x0
3
0x04
0x05
0xFF
0xFF
0xFF
0xFF
0xFF
0xFF
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Match
against
DA
Don’t-cares
Match Pattern Register
Match Enable Register