Zenith Data Systems MT2000 - Manual (Page 77)

4-24
Configuring Your System
Table 4-7. SCSISelect Setup Configurations (Continued)
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space) Enabled. 1
Support Removable Disks
Under BIOS as Fixed Disks
1, 2
Boot Only 1
Extended BIOS Translation for
DOS Drives > 1 GByte
3
Enabled 1
Display Messages During BIOS
Initialization Enabled 1
Multiple LUN Support Disabled 1
BIOS Support for Bootable CD-ROM Disabled 1 6
BIOS Support for INT 13 Extensions Enabled 1
Support for Ultra SCSI Speed Enabled 1 5
1 No effect if BIOS is disabled.
2 Do not remove media from a removable media drive if it is under BIOS control.
3 Set to Disable if NetWare 3.12 or 4.11 Network Operating System is installed.
5 Set to Disabled for AIC7860 or Enabled for AIC7880.
6 Set to Enabled for AIC7860 or Disabled for AIC7880.
Exiting SCSISelect
To exit SCSISelect, press ESC until a message prompts
you to exit (if you changed any settings, you are
prompted to save the changes before you exit).