Zenith Data Systems MT2000 - Manual (Page 70)

4-17
Configuring Your System
Table 4-5. BIOS Setup Configurations (Continued)
MENU PARAMETER NAME NORMAL SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
ADVANCED MENU
Use Mutiprocessor Specification 1.4
Plug & Play O/S No
Reset Configuration Data No
Pentium Pro BIOS Update Enabled
SECURITY MENU
Supervisor Password is: Disabled
User Password is: Disabled
*Set Supervisor Password Press ENTER.
Set User Password Press ENTER.
**Password on boot Disabled
**Diskette Write Normal
**Diskette access Supervisor
System backup reminder Disabled
Execute User ROM Disabled
Power Switch Mask Unmasked
SERVER MENU
Thermal Sensor
Press ENTER for menu.
Thermal Sensor Enabled
Upper Limit 55
Lower Limit 7
ESM ASIC Interrupt IRQ 13
SMI Enabled
Event Log Initialization Disabled
Clear Event Log No
Console Redirect Port Disabled
* Enabling supervisor password requires a password for entering SETUP.
** These parameters require prior setting of supervisor password.