Zoom IG-4160 - Manual (Page 9)

Chapter 1: Getting Started 9
1.5 Connecting the PC and the IG-4160
The diagram below shows what your completed setup will look
like.
IG -4160
ETH ER N ET C A B LE
(LA N )
M O D EM
R F (C O A X IA L) O R
PH O N E LIN E
C O N N EC TIO N
A dm in PC
C A B LE/D SL M O D EM
ETH ER N ET
(W A N ) C A B LE
or
D IA L-U P/ISD N M O D E M
SER IA L (C O M PO R T ) C A B LE
A A A A Be sure you’ve completed the pre-installation checklist on
page 8.
Shut off your computer and turn off your modem. Don’t
plug the Gateway in yet.
B B B B For cable and DSL modems:
Unplug the Ethernet cable from your PC and plug it into
the WAN port on the back of the Gateway. Don’t unplug
the Ethernet cable plugged into the modem.
For dial-up and ISDN modems:
Unplug the serial cable from the PC and plug it into the
COM port on the back of the Gateway. Don’t unplug the
serial cable plugged into the modem.
C C C C Using the Ethernet cable supplied with the Gateway, plug
one end into a LAN port (labeled 1 and 2) on the back of
the Gateway and plug the other end into the PC.