Eee e – Zoom IG-4160 User Manual

Page 10

IG-4160 Zoom Internet Gateway User Guide

Turn the modem back on. If you are using a cable or DSL

modem, wait until it synchronizes itself with the modem

service. (You’ll know it’s synchronized when the cable

modem’s light goes from blinking to steady.)

Plug the Gateway in: Plug one end of its power adapter into
the 12VDC power jack on the back of the Gateway and

then plug the other end into a wall outlet. The Gateway’s

SYS indicator will come ON for about 10 seconds, and

then it will flash rapidly a few times. When the indicator

flashes continuously once per second, the start-up process

is complete, and your Gateway is ready.

FFFF

Note: If you are using a cable modem and your service

provider has instructed you to call back with your
Gateway’s WAN MAC address, now is the time to do so.
Turn your computer back on and restart it.