Zoom IG-4160 - Manual (Page 20)

20 IG-4160 Zoom Internet Gateway User Guide
3
Setting up the Gateway as a
Print Server
If you have a Windows PC, you can use your Gateway to share
a printer. Setting up your Gateway as a print server is a three-
stage process.
1 1 1 1
Connecting the printer to the Gateway.
2 2 2 2
Installing the software from the Zoom CD on all the PCs
that will share the printer.
3 3 3 3
Configuring the print server function.
Configuration instructions differ slightly, depending on your
PC’s operating system.
3.1 Connecting the Printer to the Gateway
To connect a printer to the Gateway, you need a standard parallel
printer and cable.
On the back panel of the Gateway, plug the 25-pin end of the
printer cable into the jack labeled Printer. Plug the other end of
the cable into the jack on the back of the printer.
The next stage is to install the print server software.