Xantrex Technology 400R User Manual
Page 60
Troubleshooting
5-6
975-0162-01-01
The engine
being jump-
started will not
start.
XPower Powerpack
battery is not fully
charged.
The engine condition
is poor.
External fuse (250 A)
is blown.
The engine start
capacity exceeds the
XPower Powerpack
jump-start capability.
Recharge the XPower Powerpack
battery.
Have the engine serviced.
Replace 250 A, 32 V fuse with same
type and ratings.
The battery
clamps of the
jump-start
cables measure
zero volts.
External fuse (250 A)
is blown.
Replace 250 A, 32 V fuse with same
type and ratings.
The light does
not turn on.
Light bulb has burnt
out.
Remove lens cover and replace bulb
with one of the same type and rating.
The AM radio
does not work
or buzzes
continuously
(XPower
Powerpack
400R only).
The XPower
Powerpack AC outlets
are being used,
causing interference.
Turn off the AC outlets.
Table 5-1 Troubleshooting reference
Problem
Possible Cause
Solution